24" strut trapeze
$125.26 / EA
EL-133 · MasterFormat 26 05 29 · EA
What’s in this rate
This unit is hanging one 24-inch strut trapeze for conduit or pathway support. The electrician cuts a 24-inch 1-5/8" strut crossmember, hangs two 3/8" all-thread drops from beam clamps, levels the channel, and leaves the trapeze ready for straps. The rate is per trapeze. Strut by the stick, a single beam clamp, and conduit straps are separate units.
Includes
- 24" length of 1-5/8" × 1-5/8" 12-ga pre-galvanized strut (P1000 class)
- two beam clamps for 3/8" rod on structural flange
- 10 LF allowance of 3/8" electro-galvanized all-thread (two drops from one 10-ft stick class)
- hex nuts / washers / strut-washer class hardware
- cut, hang, and level
- stated material (and 8% waste on cable lines only, where a cable line exists)
- small tools shown as a separate line
Excludes
- strut channel billed by the stick (buy strut-channel-1-5-8)
- beam clamp alone (buy beam-clamp)
- conduit / pipe straps on the channel
- seismic bracing
- tax / freight
- after-hours, premium access, hazardous-material handling
- permits, inspections, and testing beyond a functional check
Build-up
- Labor 0.75 hr × $70.00 wage and burden
- $52.50
- Material and small tools
- $51.02
- Direct rate (labor, material, and tools)
- $103.52 / EA
- Overhead 10% of direct
- $10.35
- Fee 10% of (direct and overhead)
- $11.39
- Loaded rate
- $125.26 / EA
Related rates
Use this in a private library
Create a free account to keep your own hours, burden, and supplier quotes behind a login. Published rates stay public. Your own hours and quotes stay private.