Vinyl L-bead
$3.39 / LF
Vinyl L-bead costs about $3.39 per linear foot installed. This is a published starting point and varies by region and job.
DW-111 · MasterFormat 09 22 00 · LF
What’s in this rate
This unit is installing one linear foot of vinyl L-bead on a prepared gypsum edge. The drywall crew cuts, sets, and secures the bead then applies the finish coats over the bead work. Paper-faced bullnose, J-bead, U-bead, and gypsum hang are separate units.
Includes
- vinyl L-bead
- fastener and mud-set allowance
- cut, set, and secure bead
- embed coat, finish coats, and sanding over the bead (finish-ready to Level 4)
- small tools
Excludes
- gypsum hang
- vinyl U-bead
- J-bead
- paper-faced bullnose
- primer and paint
- wall-field tape and finish (tape-and-finish level unit)
Build-up
- Labor 0.045 hr × $51.00 wage and burden
- $2.30
- Material and small tools
- $0.50
- Direct rate (labor, material, and tools)
- $2.80 / LF
- Overhead 10% of direct
- $0.28
- Fee 10% of (direct and overhead)
- $0.31
- Loaded rate
- $3.39 / LF
Related rates
Use this in a private library
Create a free account to keep your own hours, burden, and supplier quotes behind a login. Published rates stay public. Your own hours and quotes stay private.